Control system line endings
Some control systems, iRule among them, need \x0D instead of \r — and \x0A instead of \n — to terminate an IP command string. See the IP and Telnet chapter for the command syntax itself.
Sources that need a power cycle
Some sources need the power cord removed and reconnected between EDID changes. A hot-plug event is usually enough, but where a source refuses to pick up a new EDID, a full power cycle is the next step rather than a sign that the EDID is wrong.
Atmos over ARC needs the right cable
Atmos via ARC requires an HDMI cable that supports 192kHz ARC. A cable can carry a 600MHz video signal perfectly and still fail on the 192kHz audio signal, which is why an ARC audio problem is not evidence that the cable is fine for audio.
4:2:2 is always 12-bit
Any 4:2:2 signal is always processed at 12-bit and is never clipped. That is why specifications say “up to 12-bit” rather than listing separate 4:2:2 bit depths.
Need the hardware?
Open the DR HDMI 8K product page on HDfury.uk.