Firmware
Releases and what changed
Newest first. Each package contains the update file and the full IP command list matching that revision — always use the command list from the package you flashed.
Firmware 1.5Latest
- Fixed 2-block EDID reading of the sink.
Firmware 1.4
- Added support for DisplayID 2.0: 384b (3 blocks) and 512b (4 blocks) EDID in COPY TX mode.
- Added support for DisplayID 2.0: 384b and 512b custom EDID 1–10.
- Added support for DisplayID 2.0: 384b and 512b EDID in AUTOMIX mode.
- Added the ability to retain DTD data.
Firmware 1.3
- Added support for EDID with a DisplayID block, and for any EDID of 384b or 512b. At this revision it works in COPY TX SINK EDID mode only.
Firmware 1.2
- Fixed a hot-plug issue on GPUs when TMDS termination is active.
Firmware 1.1
- First public release.
Before you update
Four things that save you a support round
- Export your config first. On the CONFIG page of the web server, use EXPORT CONFIG. After the update you can put your settings back instead of redoing them. See the config export chapter.
- Reset after updating. We recommend resetting all settings after each update if anything behaves oddly: on the CONFIG page tick both checkboxes in the RESET area, type RESET, and confirm.
- Refresh your browser. After the update, press Ctrl+F5 (Cmd+Shift+R on a Mac) or clear the browser cache, otherwise you keep looking at the old web interface.
- Give it 15 seconds. The OLED stays blank while the unit restarts and reconfigures itself. That is normal.
The full procedure — choosing the file, flashing it and confirming the new version — is in chapter 9 of the manual.
Documentation and tools
Other downloads
DR HDMI 8K user manualPDF · Rev 1.2 · 35 pages
The complete manual. Also available as 17 web pages.
HDfury EDID collectionZIP · EDID binaries
A set of EDID binaries you can upload into the custom EDID slots. See the EDID tables chapter.
Need the hardware?
Open the DR HDMI 8K product page on HDfury.uk.