17 chapters
What the DR HDMI 8K is, the HDMI 2.1 bandwidth it passes, and the three ways to control it: rotary switch, embedded web server and IP/Telnet.
Chapter 2Connecting cablesPower, HDMI input, HDMI output and Ethernet on the DR HDMI 8K, plus the cable requirement for a full 1500MHz / 48Gbps link.
Chapter 3OLED display & controlsWhat the DR HDMI 8K OLED shows at power-up, how to cycle the four info pages with the rotary switch, and what each page reports.
Chapter 4Accessing the web serverThree ways to reach the embedded DR HDMI 8K web server over Ethernet, what the top section reports, and how to recover from a wrong static IP.
Chapter 5Web server: MAINEvery field on the DR HDMI 8K MAIN page: live signal and TMDS reporting, the TX and RX EDID readouts, the three EDID modes and all video and audio flags.
Chapter 6The 100 EDID tablesThe complete list of the 100 EDID tables in the DR HDMI 8K, from 8K60 4:2:0 FRL-5 down to 480p60, with the ten custom-default display profiles.
Chapter 7Web server: DV sectionHow the DR HDMI 8K sniffs and stores the sink Dolby Vision data block, and every field for constructing a custom DV data block including primaries and luminance.
Chapter 8Web server: CONFIGEvery option on the DR HDMI 8K CONFIG page: HTPC mode, OLED behaviour, TX +5V force, DHCP and static IP, IP port, hot-plug, reboot and factory resets.
Chapter 9Firmware updateStep-by-step firmware update for the DR HDMI 8K through the embedded web server, what to expect during flashing, and what to do if the update will not start.
Chapter 10Config exportWhat the DR HDMI 8K EXPORT CONFIG option writes into its text file, including active EDID information, IP settings, OLED options and the raw RX and TX EDID blocks.
Chapter 11IP / Telnet controlThe command syntax for controlling the DR HDMI 8K over IP, Telnet or HTTP: default port, line endings, and the get and set command forms.
Chapter 12FAQ: generalThe general FAQ from the DR HDMI 8K manual: supported resolutions, HDMI versions, latency, long cable runs, lossless audio pass-through and USB power.
Chapter 13FAQ: Apple TV 4KApple TV 4K questions from the DR HDMI 8K manual: why it retests Dolby Vision after an EDID change, and how to get Atmos detected correctly.
Chapter 14FAQ: Dolby VisionDolby Vision and LLDV questions from the DR HDMI 8K manual: max luminance values, DCI-P3 versus BT2020 primaries, red tint, and player-led LLDV output.
Chapter 15FAQ: NVIDIA ShieldNVIDIA Shield questions from the DR HDMI 8K manual: getting Atmos out of streaming apps and what to change when one app lags behind the others.
Chapter 16SpecificationsThe DR HDMI 8K specifications from the manual: 1500MHz 48Gbps pass-through, supported video and audio formats, dimensions, power, input lag and certifications.
Chapter 17Pro tipsShort practical notes from the end of the DR HDMI 8K manual on control-system line endings, sources needing a power cycle, ARC cable requirements and 4:2:2 bit depth.
Not sure what a term means?
The glossary explains 110 terms from this manual in plain language — EDID, FRL, handshake, RX and TX, ALLM, VRR, HDR10, Dolby Vision, LLDV, Atmos, Telnet, DHCP, mDNS, firmware and much more. Every one of them is linked automatically wherever it appears on this site.
Need the hardware?
Open the DR HDMI 8K product page on HDfury.uk.